IPTV is a digital television; it can be connected to; a television, a computer, a smartphone and a media player. There are many ways to connect IPTV to LED Panels which allows any user to set up and watch digital channels according to their own capabilities, you just need to know how to do it right.
General login information:
Today, interactive television is a serious alternative to cable or satellite TV. The quality of the broadcast is fully compatible with the modern characteristics of TVs, and the additional features significantly expand the possibilities of using TV content. In addition, the new generation interactive TV has certain advantages when it comes to broadcasting or cable broadcasting – it is the best sound and the best picture. Given the possibilities of modern TVs with high resolution, it makes sense to set up IPTV on a TV. In addition, IPTV licensees can use other services related to TV content.
You can connect digital TV in any convenient way, each with its own nuances:
- Via the connected IPTV prefix;
- Via a router via a wireless connection;
- Using special applications;
- Via internet browser.
Note: In most cases, connection to the TV is made using the first two methods. These are suitable for various gadgets or computers.
Features of the console connection:
Connecting a digital decoder is not much different from installing various TV tuners. The connection to the router is made via a standard Ethernet connector; it is available and wireless setting via Wi-Fi. If you want or in case of difficulty; you can use the wire, and connect it to the LAN connector.
On any IPTV console, there are other outputs:
- AV for connection to obsolete TVs;
- HDMI for more modern panels;
- USB connector (usually located on the front).
To get digital TV on your TV, you need either HDMI-or AV. The connection with the decoder is made by connecting the corresponding wire. The physical connection of the decoder is terminated.
Console setting:
After connecting the console, it must be activated. A menu is displayed on the TV for watching IPTV. Customizing the software is generally fairly straightforward. There is a Setup button on the remote control; after pressing it, the following settings should be made.
- Set the clock and date in the advanced settings window. This is necessary to use various options such as time shift and video on demand.
- For a wired connection, you must configure the network connection: to do this, select the type (Ethernet connection) in the Network configuration menu.
- Then in the next tab click on AUTO (DHCP) and enable it, confirm the command by clicking OK.
- In the Network Status tab, check the status of the Ethernet connection
- Open the “Servers” menu, configure pool.ntp.org. in the field of NTP servers.
- After that, you can adjust the video by opening the “Video setup” tab; turn off “Force DVI” and “Auto / automatic frame rate change” options. Then all you have to do is set the screen resolution settings, as well as the video output mode (here you will need instructions. For example, in older models it is called PAL).
- Save the settings and restart the console.
In the event of technical failure, marriage or other difficulties, it is possible that the console is not working incorrectly. If after all the manipulations the device generates errors, you can repeat the settings, familiarize yourself with the decoding of the problems in the instructions or contact your supplier or the manufacturer of the decoder for technical assistance.